Electrophoresis Gel Stains
Apexbio Technology LLC Safe DNA Gel Stain, 1ml Cas No: NA MFCD: NA
Safe DNA Gel Stain is a highly sensitive stain for visualization of DNA or RNA in agarose or acrylamide gels. SYBR Safe stain is specifically formulated to be a less hazardous alternative to ethidium bromide (EB) that can be used with either blue-light or UV excitation. SYBR Safe DNA Gel Stain is a better nucleic acid staining reagent for all of your molecular biology needs. SYBR Safe DNA Gel Stain is not only better for you and the environment, but also your sample and your institution. There are other sizes available. Please inqury us for quote.
AMPLYUS LLC miniPCR bio Gel Loading Dye, Blue, 10X (1 ml)
Gel loading dye, blue, 10X concentrate, 1 mL.
Aat Bioquest Gelite Safe DNA Gel Stain GelRed Replacement 10000X in DMSO (0.5 mL)
AAT Bioquest is committed to designing our products to be environment-friendly. This catalog is for 0.5 mL.
Sigma Aldrich Fine Chemicals Biosciences GelRedR Nucleic Acid Stain
GelRed is a sensitive stable and environmentally safe fluorescent nucleic acid dye designed to replace the highly toxic ethidium bromide (EtBr) for staining dsDNA ssDNA or RNA in agarose gels or polyacrylamide gels. GelRed and EtBr have virtually the same spectra (figure 1) so you can directly replace EtBr with GelRed without changing your existing imaging system. In addition GelRed is far more sensitive than EtBr (figure 2).The dye is noncytotoxic and non-mutagenic at concentrations well above the working concentrations used in gel staining. GelRed successfully passed environmental safety tests in compliance with CCR Title 22 Hazardous Waste Characterization under which GelRed is not classified as hazardous waste.Spectral PropertiesAbsorbance Standard Transilluminator (302 or 312 nm)Emission Ethidium Bromide SYBR or GelStar filter
Medchemexpress LLC HY-Y1309 5g Medchemexpress, 1-Naphthol CAS:90-15-3 Purity:>98%
Medchemexpress, HY-Y1309 5g 1-Naphthol CAS:90-15-3 1-naphthol is an excited state proton transfer (ESPT) fluorescent molecular probe. Purity:>98% Medchemexpress has over 10000 novel life-science reagents, reference compounds, APIs and natural compounds for laboratory and scientific use. Other quantity can also be offered.
PACIFIC BIOSCIENCES OF CALIFORNIA INC PacBio Nanobind HT CBB Kit, HMW DNA Extraction, Automated, High-Throughput
Nanobind HT kits leverage novel magnetic disk technology for rapid extraction and purification of high-quality DNA and RNA. They offer high binding capacity for high purity, high molecular weight (HMW) and ultra-high molecular weight (UHMW) DNA without fragmentation. Designed for automated extraction from diverse sample types, supporting up to 96 samples per run for HiFi sequencing.
- Rapid extraction and purification of high-quality DNA and RNA.
- High binding capacity for high purity, HMW, and UHMW DNA.
- Standard lyse, bind, wash, and elute procedure.
- Binds and releases DNA without fragmentation.
- Exclusively for automated extraction.
- Compatible with diverse sample types (cells, blood, bacteria).
- Processes up to 96 samples per run.
- Produces DNA suitable for sequencing.
Bio Rad Laboratories BLUE R-250 STAINING SOLUTION
Coomassie Brilliant Blue R-250 Staining Solution #1610437
ABP BIOSCIENCES Phospho-Tag™ Phosphoprotein Gel Stain
Phospho-Tag™ Phosphoprotein Gel Stain is a high sensitive fluorescent stain designed for selectively detecting phosphoproteins in polyacrylamide gels. This stain contains a phospho-tag™ group, which allows direct, in-gel detection of phosphate groups attached to tyrosine, serine, or threonine residues, without the need for antibodies or radioisotopes. The stain can be used with standard SDS-polyacrylamide gels or with 2-D gels.
Bioworld Laemmli SDS-Sample Buffer (4X), Non-Reducing, 50 mL
Laemmli (SDS-Sample) 4X Buffer, Non-Reducing An electrophoretic dye for denaturation of proteins and monitoring the front of running gel. Composition of this buffer is similar to the reducing buffer minus mercaptoethanol. Technical Information:Ultra Pure GradeContents of a 1X Solution: 2% SDS and 10% glycerol, 62.5mM Tris -HCl (pH 6.8), 0.002% Bromophenol blue.DNase: None detectedRNase: None detectedProteases: None detectedStability (4°C) >1 Year
Biotium One-Step Lumitein™ UV Protein Gel Stain, 1X
One-Step Lumitein™ UV Protein Gel Stain is a ready-to-use luminescent protein gel stain. Gels stained with One-Step Lumitein™ UV can be visualized with a variety of different UV-based fluorescence imaging systems. Convenient staining protocol, requiring only a single 5-30 minute staining step without fixation, destaining is optional. The stain is sensitive, detecting ~ 1-10 ng of protein per band (staining intensity can vary between proteins) and comparable to the Oriole™ Fluorescent Gel Stain(Bio-Rad). Unlike other fluorescent gel stains like Oriole™ or Flamingo™, One-Step Lumitein™ UV is an aqueous-based solution that does not does not contain hazardous methanol or acetic acid for safer handling and ease of disposal, does not cause gel shrinkage, and is significantly lower in cost. Staining is fully compatible with mass spectrometry and Edman-based sequencing.
Biotium One-Step Lumitein™ Protein Gel Stain, 1X
One-Step Lumitein™ Protein Gel Stain is a ready-to-use luminescent red protein gel stain. It is a dramatically improved version of our original Lumitein™ protein gel stain for convenience and safety. One-Step Lumitein™ gel staining requires only a single 5-60 minute staining step without fixation. Destaining is optional. One-Step Lumitein™ can detect as little as approximately 1-10 ng of protein per band depending on the staining method used, although staining intensity varies between proteins. Staining is fully compatible with mass spectrometry and Edman-based sequencing. Staining can be imaged using a UV transilluminator with EtBr or SYBR filter set, a blue light transilluminator, or a laser-based gel scanner.
Biotium One-Step Lumitein™ UV Protein Gel Stain, 1X
One-Step Lumitein™ UV Protein Gel Stain is a ready-to-use luminescent protein gel stain. Gels stained with One-Step Lumitein™ UV can be visualized with a variety of different UV-based fluorescence imaging systems. Convenient staining protocol, requiring only a single 5-30 minute staining step without fixation, destaining is optional. The stain is sensitive, detecting ~ 1-10 ng of protein per band (staining intensity can vary between proteins) and comparable to the Oriole™ Fluorescent Gel Stain(Bio-Rad). Unlike other fluorescent gel stains like Oriole™ or Flamingo™, One-Step Lumitein™ UV is an aqueous-based solution that does not does not contain hazardous methanol or acetic acid for safer handling and ease of disposal, does not cause gel shrinkage, and is significantly lower in cost. Staining is fully compatible with mass spectrometry and Edman-based sequencing.
Biotium NucSpot 470, 1000X in DMSO
NucSpot 470 is a cell membrane-impermeant green fluorescent DNA stain. It is virtually non-fluorescent in the absence of DNA, but fluoresces bright green upon DNA binding. While other green nucleic acid stains like TOTO, TO-PRO, or SYTOX dyes stain both the nucleus and cytoplasm, NucSpot 470 specifically stains the nucleus of fixed and permeabilized cells. It also can be used to selectively stain dead cells in living cultures. NucSpot 470 has an excitation/emission of 460/546 nm and can be imaged using standard settings for FITC. Properties: Ex/Em= 460/546 nm (with DNA); Store at 4°C and protect from light.
Biotium DAPI, dilactate (4’, 6-diamidino-2-phenylindole, dilactate)
DAPI (4′,6-Diamidino-2-Phenylindole, dilactate) is a popular blue DNA dye that is used as a nuclear counterstain in fluorescence microscopy, chromosome staining and flow cytometry. DAPI (dilactate) powder is more water soluble than dihydrochloride salt, and therefore a better choice for preparing aqueous stock solutions. The dye binds to the minor groove of dsDNA with approximately 20-fold fluorescence enhancement, with higher affinity for A-T rich regions. DAPI may be used in fixed cells or in live cells at higher concentrations. The dye has an excitation/emission of 358/461 nm. Properties: Yellow solid soluble in water; Store dessicated at 4°C, protect from light; Ex/Em= 358/461 nm (with DNA); C22H27N5O6; MW:457.49; [28718-91-4].
Biotium Hoechst 33342, 10mg/mL in H2O
Hoechst dyes are cell membrane-permeant, minor groove-binding blue fluorescent DNA stains. These dyes are widely used in cell cycle and apoptosis studies as nuclear counterstains. Hoechst 33528 is slightly more water soluble than Hoechst 33342. The dyes can be used to stain live or fixed cells in buffer or medium at 1 ug/mL, with no wash step required. Properties: Yellow solution; Store at 4°C, protect from light; Ex/Em= 350/461 nm (with DNA); C27H31Cl3N6O; MW: 561.93; [23491-52-3].